Always 100% Free for Job Seekers

Aerial view of U.S. infrastructure at sunset: the buildings and facilities Metro Associates staffs
// National Engineering Staffing

MEP Engineering Recruiter
United States

Premier national engineering staffing for mechanical, electrical, and plumbing engineers across data centers, healthcare, life sciences, and commercial buildings in all 50 states. We help firms hire licensed PEs, project managers, and technical specialists.

Always 100% Free for Job Seekers

Metro Associates focuses exclusively on engineering, architecture, and construction careers. We specialize in connecting qualified professionals with opportunities nationwide.

HVAC Systems Engineering✦Electrical Power Design✦Plumbing & Fire Protection✦Building Automation✦Energy Modeling✦Data Center MEP✦Commissioning (Cx)✦Licensed Professionals✦HVAC Systems Engineering✦Electrical Power Design✦Plumbing & Fire Protection✦Building Automation✦Energy Modeling✦Data Center MEP✦Commissioning (Cx)✦Licensed Professionals✦
// National expertise

National MEP engineering recruiting

Metro Associates provides specialized MEP staffing on a national scale, supporting firms delivering data centers, healthcare facilities, life sciences campuses, and commercial buildings. Our reach extends across the Northeast, Southeast, Midwest, Gulf Coast, and Pacific West.

Recruiting expertise

  • Mechanical & HVAC Systems Engineering (ASHRAE Standards)
  • Electrical Power & Distribution Design (NEC / IEEE)
  • Plumbing & Fire Protection Engineering (NFPA)
  • Building Automation & Controls (BAS / BMS)
  • Energy Modeling & Sustainability (LEED / ASHRAE 90.1)
  • Data Center & Mission-Critical MEP
  • Building Commissioning (Cx) & Retro-Commissioning
// How firms engage us

MEP engineering staffing, commissioning and executive search

MEP hiring splits by project type far more than by job title, so an MEP staffing agency has to recruit a data center program and a hospital retrofit differently. These are the three routes firms use, and what each is good for.

01

Direct hire and permanent placement

Mechanical and electrical PEs, Revit-fluent MEP designers, plumbing and fire protection engineers. Screening is against the credential the work genuinely requires, which is the PE where drawings are sealed, and LEED AP, BEMP, CEM or NICET where they are not.

02

Executive search and headhunting

Directors of MEP engineering, mission-critical practice leads and department heads, approached directly. At that level the filter that works is which review authority passed their drawings and which projects were delivered, not a keyword match.

03

Commissioning and contract support

Commissioning is recruited as its own discipline, because the skill is testing, measurement and fault-finding rather than modeling. CxA and commissioning engineer scopes often run to a building's schedule, so we staff them to that schedule when a client asks.

// Markets we serve

MEP engineering recruiting by city

Explore our specialized recruiting in these metros, with more markets added regularly.

New York, NYNYC DOBLos Angeles, CALADBSChicago, ILChicago DOBHouston, TXCity of Houston Permitting CenterPhoenix, AZCity of Phoenix Planning & DevelopmentPhiladelphia, PAPhiladelphia L&IDallas, TXCity of Dallas Development ServicesAtlanta, GACity of Atlanta Office of BuildingsMiami, FLMiami-Dade RERSeattle, WASeattle DCIDenver, CODenver CPDBoston, MABoston ISDMinneapolis, MNMinneapolis Regulatory ServicesDetroit, MIDetroit BSEEDCharlotte, NCCharlotte-Mecklenburg Code EnforcementNashville, TNMetro Nashville Codes DepartmentPortland, ORPortland BDSLas Vegas, NVClark County Building DepartmentColumbus, OHColumbus Building & Zoning ServicesSalt Lake City, UTSLC Building ServicesKansas City, MOKCMO Codes AdministrationIndianapolis, INIndianapolis DBNSMilwaukee, WIMilwaukee DNSRichmond, VARichmond PDRBaltimore, MDBaltimore DHCD PermitsNew Orleans, LANOLA One Stop PermitsLouisville, KYLouisville Metro Codes & RegulationsOklahoma City, OKOKC Development ServicesCharleston, SCCharleston County Building ServicesNewark, NJNewark UCC DivisionSan Francisco, CASF DBISan Diego, CASan Diego DSDSan Antonio, TXSan Antonio DSDAustin, TXAustin DSDJacksonville, FLJacksonville Building Inspection DivisionOrlando, FLOrlando Permitting ServicesPittsburgh, PAPittsburgh PLICincinnati, OHCincinnati Buildings & InspectionsCleveland, OHCleveland Building & Housing DepartmentSt. Louis, MOSt. Louis Building DivisionRaleigh, NCRaleigh Development ServicesWashington, DCDC DOBHartford, CTHartford Development ServicesAlbuquerque, NMAlbuquerque Planning DepartmentBirmingham, ALBirmingham Planning, Engineering & PermitsMemphis, TNMemphis Construction Code EnforcementOmaha, NEOmaha Planning DepartmentBoise, IDBoise Planning & Development ServicesProvidence, RIProvidence Inspection & StandardsBuffalo, NYBuffalo Permit & Inspection Services
// Roles we place nationwide

Roles we place

01MEP Project Manager (PE)
02Senior Mechanical / HVAC Engineer
03Electrical Engineer (Power & Lighting)
04Plumbing & Fire Protection Engineer
05Building Automation / Controls Engineer
06Energy & Sustainability Engineer
07Commissioning Engineer / Agent (CxA)
08MEP BIM / Revit Coordinator
09Director of MEP / Engineering Lead

2026 national compensation trends

MEP Designer / Revit Modeler$60,000 – $88,000
Mechanical / Electrical Engineer (EIT)$70,000 – $95,000
Commissioning (Cx) Engineer$85,000 – $125,000
Fire Protection Engineer (PE)$100,000 – $145,000
Licensed MEP PE (Mid-Level)$105,000 – $155,000
Data Center Electrical Engineer (PE)$125,000 – $175,000
Senior MEP Project Manager$145,000 – $195,000+
Director of MEP Engineering$180,000 – $260,000+
// Tools & credentials

MEP software & licensure we recruit for

The tools and credentials a role asks for, verified before a resume reaches you. What an engineer can do with them is the section below.

Autodesk Revit MEPAutoCAD MEPNavisworks (BIM coordination & clash detection)Trane TRACE 700 / TRACE 3D PlusCarrier HAP (Hourly Analysis Program)eQUEST / EnergyPlus energy modelingETAP / SKM power systems analysisAGi32 lighting designBluebeam RevuAutodesk Construction Cloud / BIM 360Building automation (Niagara, Siemens, JCI Metasys)Professional Engineer (PE) licenseLEED AP / LEED Green AssociateASHRAE certification (BEMP / CEM)NICET certification (fire protection)HVAC load calculations & system designElectrical power distribution & short-circuit studiesFire protection system design (NFPA 13 / 14)Commissioning (Cx) per ASHRAE Guideline 0 / 1Code compliance: NEC, IMC, IPC, ASHRAE 90.1
// What we screen for

Ten areas every MEP candidate is screened against

MEP is three disciplines and almost nobody practices all three. Most engineers are deep in one and coordinate with the other two, so we read items two, three and four as which one and how deep, never as a checklist one person should tick end to end.

01

Codes and permitting

Identifies the building, mechanical, electrical, plumbing, fire and energy codes that apply, and answers plan review comments. Editions and local amendments vary by jurisdiction, so we ask which ones an engineer has actually worked under rather than which they can name.

02

Mechanical and HVAC design

Runs heating and cooling load calculations, designs ventilation, ductwork and hydronic piping, and selects equipment. Handles humidity, indoor air quality and thermal comfort as design problems rather than afterthoughts.

03

Electrical power and lighting

Calculates loads and sizes services, feeders, panels and transformers. Designs lighting and emergency power, and works confidently with grounding, voltage drop, short circuit analysis and protective device coordination.

04

Plumbing design

Designs domestic water, hot water, sanitary drainage, venting and storm drainage. Calculates demand, pressure loss and pipe sizes, and coordinates backflow prevention and any gas systems in scope.

05

Revit, BIM and construction documents

Produces coordinated models, drawings, equipment schedules, details and specifications. Knows AutoCAD and review tools such as Bluebeam where the employer works in them.

06

Coordination and constructability

Resolves conflicts with architecture, structure and the other building systems. Thinks in ceiling space, shafts, equipment access, maintenance clearances and how the work actually gets installed.

07

Energy efficiency and system selection

Compares system options on energy use, operating cost and maintenance burden. Works to the applicable energy code, and knows where heat recovery, high efficiency equipment and electrification earn their place.

08

Controls and building automation

Writes or reads sequences of operation, control diagrams, sensors, alarms, schedules and equipment interlocks. Understands how the systems behave together, including when something fails.

09

Construction administration and field work

Reviews shop drawings and equipment submittals, answers RFIs, observes on site, evaluates substitutions and reconciles the drawings against what was actually installed.

10

Commissioning, quality control and delivery

Checks calculations and drawings, supports startup and functional testing, closes out deficiencies, and explains scope, budget, schedule and design decisions in terms a client follows.

// Technical foundation
  • ASHRAE standards for HVAC, ventilation, comfort and energy
  • National Electrical Code (NFPA 70)
  • The applicable plumbing code, such as the Uniform Plumbing Code

Adoption is set by each state and local jurisdiction, including which edition applies and what has been amended. We screen for engineers who verify that for the project in front of them instead of assuming the code they last worked under still governs.

// Why partner with us

Why firms partner with Metro Associates

National Talent Pipeline

Access to a vast database of 50,000+ pre-vetted engineering professionals.

Multi-State Licensing Expertise

We understand NCEES comity and the complexities of multi-state PE licensure.

Passive Candidate Acquisition

Our recruiters reach high-performers who are not actively on job boards.

Scalable Staffing Solutions

From a single PE to an entire MEP team for a multi-year project.

Codes & Standards Fluency

Fluency in ASHRAE, NEC, NFPA, and IECC requirements for complex building projects.

Partner with a national MEP engineering recruiter

Looking to scale your team or explore new opportunities across the U.S.? Tell us what you need.

// Award-winning clients

The awards our clients’ work wins

We recruit for firms whose projects are entered, and recognized, in the programs below. Metro doesn’t enter them; a recruiting firm isn’t eligible. We place the engineers who deliver the work that does, which is why we track what these juries reward.

ACEC logoACECEngineering Excellence AwardsThe engineering profession's flagship project competition, judged on innovation, complexity and social value. Categories include Building/Technology Systems, Energy, Water and Transportation.State → nationalACEC logoACECACEC state & metro member organizationsNational entries must come up through one of 51 state and metropolitan organizations, so every state runs its own Engineering Excellence competition first.All 50 states + DCENR logoENRBest Projects & Best of the BestRegional project awards across every state, DC and Puerto Rico, judged in 18 categories from airport/transit to sports/entertainment, plus special awards for safety and sustainability. Regional winners advance to the national round.Regional → nationalASHRAE logoASHRAETechnology AwardsHVAC and building-systems performance in real, occupied buildings, commercial, health care, education, industrial and residential categories.Chapter → region → societyIES logoIESIllumination AwardsLighting design and controls, interior, outdoor, energy & environmental, and control innovation.Section → internationalNECAProject Excellence AwardsElectrical construction across 13 categories, from design-build and health care to substations and EV infrastructure.NationalConsulting-Specifying Engineer logoConsulting-Specifying EngineerMEP GiantsThe annual ranking of North America's 100 largest MEP and fire-protection engineering firms.North AmericaConsulting-Specifying Engineer logoConsulting-Specifying Engineer40 Under 40Individual recognition for mechanical, electrical, commissioning, fire/life-safety and energy engineers under 40, worth knowing about when you're hiring one.NationalUSGBC logoUSGBCLocal Leadership AwardsLEED and high-performance building work, recognized at project and individual level.State & regional

Every US state and Washington, DC runs its own Engineering Excellence competition. See the state-by-state list.

Each logo is the trademark of the organization that runs the program, shown to identify it. Metro Associates is not affiliated with, endorsed by, or a winner of any of them; our clients are the entrants.

// By discipline

The three desks inside MEP

Different licences, different software and different shortages. Each desk has its own page.